DCA 2422

2-Channel Power Amplifier


SPECIFICATIONS DCP 100 2-Channel Power Amplifier
Front Panel Controls
Power switch Rocker switch
Mute control Push button
Auditorium fader Rotary encoder
Monitor volume/parameter adjust Rotary encoder
Menu-driven LCD Touch control LCD
Rear Panel Connectors
D-Cinema input DB-25: AES3/EBU channels 1-8
Audio Formats 5.1, 5.1 EX, 7.1 DS
Analog input DB-25: Analog audio channels 1-8
Universal Mic/Line input XLR: Mic (+ phantom pwr) or line level
S/PDIF input RCA: Stereo digital audio interface and Lt/Rt Matrix
RCA (L/R) inputs RCA (two): Stereo Left and Right and Lt/Rt Matrix
Dataport outputs HD-15 (eight): QSC amplifier interface
Automation inputs 2 x 6-pin Euro-style (six) digitally-sampled analog control inputs
Serial Control DB-9 RS-232 serial interface
Logic output 4-pin Euro-style (two) outbound control
Relay outputs 6-pin Euro-style (two) outbound control
USB port Config and management interface
Control RJ45 10/100 Mbps network management
SD card receptacle Configuration memory card (1 GB min)
HI and VI Impaired Outputs
Output stage type Single ended (balanced Z)
Output impedance 50 ohms
Nominal output level -11.8 dBu (200 mV rms)
Loading requirements RMIN = 2 kΩ, CMAX = 4 nF
Control Network
Protocol Standard TCP/IP implementation over Ethernet or Fast Ethernet.
Data rate 10/100 Mbps
Connection requirements Cat-5 UTP cable or better (100 m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN
Line voltage requirements 100–240 VAC, 50/60 Hz
Dimensions (HWD) inches 5.25 × 19 × 15.2
Dimensions (HWD) mm 133 × 483 × 386
Weight 16.6 lb (7.5 kg)